HP ESL E-series Tape Libraries - Manual (Page 94)

Table 17 Interfaces
Host to library interfaces
SCSI-2 medium changer command set Software
Power input
1 or 2 standard US C19 to NEMA L6–20P rated at
250 VAC and 16 amps Power cord
Host to tape drive interface
SCSI-2 Software
NOTE:
For HP StorageWorks FC Interface Controller specifications, see the documentation that shipped with
your controller.
Performance and reliability characteristics
Table 18 and Table 19 list performance and reliability characteristics of the library.
Table 18 Performance characteristics
18 to 20 seconds, consisting of two Move Medium commands Average swap time
Less than 3 minutes, fully loaded with labeled cartridges Inventory
Table 19 Reliability characteristics
250,000 power-on hours MTBF
1 million load/unload cycles MSBF
Less than 30 minutes MTTR
NOTE:
Tape drive and media specifications are described in Tape drives .
Environmental specifications
Table 20 provides various library environmental specifications.
Table 20 Environmental specifications
Power environment
200 VAC to 240 VAC Voltage Electrical inputs
50 / 60 Hz Rated frequency
Library characteristics 94