HP ESL E-series Tape Libraries - Manual (Page 24)

2. Serial port 1. Reset button
4. FC port 0 (external connection) 3. Ethernet port
6. Tape drive FC port 0 (internal connection) 5. FC port 1 (external connection)
8. Tape drive FC port 2 (internal connection) 7. Tape drive FC port 1 (internal connection)
9. Tape drive FC port 3 (internal connection)
Figure 11 e2400-FC 4G interface controller
.
Reset button
To force a manual reboot of the FC interface controller, use the reset button (see Figure 9 , Figure 10 ,
or Figure 11 ). Press the button with a paper clip or other small object. You can also select the Reboot
menu option in the Command View TL, as described later in this manual.
CAUTION:
Using the Reset button during an ongoing data backup, restore, or other data transfer process, can
result in a disruption of that process and a loss of data. Before selecting the Reset button, verify that
no data is currently transferring through the FC interface controller by visually inspecting the Activity
LEDs of all I/O ports on the FC interface controller.
Power indicator
The interface controller has one power LED.
• Green - Power has been applied to this module
• Yellow - Power-On-Self-Test (POST) in process or processor problems
Library overview 24