HP ESL E-series Tape Libraries - Manual (Page 65)

2. Use the Up and Down arrows to choose Open, then press Select.
A warning message appears to remind you to open the load port door.
CAUTION:
Ensure that the load port door is open so that the door's clip is not damaged when the load
port ejects.
Open the load port door and press OK. The load port moves forward.
3. Pull the load port towards you to access the removable magazines.
4. The OCP displays Opening Left Load Port Done, or Opening Right Load Port
Done
, depending on which port you selected.
5. Press OK to acknowledge that the load port is open.
6. When you are done, push the load port back into the cabinet until you hear it click into place.
7. Close the load port door.
8. When you are finished viewing the load port status, press Back to return to the Menu screen.
NOTE:
When a load port is opened and closed, the load port is inventoried.
Operations screen
The Operations screen enables you to view the status and issue commands to the cabinet and tape
drives.
To access the Operations screen, press Ops from the Home screen. The Operations screen appears
(see
Figure 47 and Figure 49 ).
Figure 47 Operations screen (standalone library)
.
HP StorageWorks ESL E-Series Tape Library 65