HP ESL E-series Tape Libraries - Manual (Page 63)

4. To edit the Network Settings information, use the Up and Down buttons to highlight the section
and press Select.
NOTE:
Setting the IP address requires one additional step. After pressing Select, power down from
the Menu screen.
Viewing the IPv6 Network Settings
View IPv6 Network Settings from the OCP:
1. From the Setup screen, use the Up and Down buttons to select Change Network Settings and
press Select.
2. Use the Down button to highlight IPv6 Status.
3. Press Select to view the following:
• IPv6 Status
• Interface Identifier
• Stateless Status
• Stateless Addresses
• Manual IPv6 Status
• Manual IPv6 Addresses
• IPv6 Domain Name
Figure 44 IPv6 Network Settings
.
NOTE:
View IPv6 Settings screen provides read-only status. To change IPv6 settings, use your CVTL program
or the command line interface (CLI).
HP StorageWorks ESL E-Series Tape Library 63