HP ESL E-series Tape Libraries - Manual (Page 136)

Message name / description ASCQ ASC Sense
key
LOGICAL UNIT TURNED ON-LINE
Through the menu options, bring the library on-line. This message is
informational only; no action is required. 09 80 6
LOGICAL UNIT TAKEN OFFLINE
Library was taken off-line through the remote web management or OCP. 09 80 6
DATA TRANSFER CHANGED
A drive has been inserted/removed into the system. Use “Read Element
Status” to determine status of drives. 0E 80 6
MODE PARAMETERS CHANGED
Mode parameters may have changed due to another host issuing a Mode
Select command. 01 2A 6
MAGAZINE INSERTED
A tape cartridge magazine has been inserted. 13 3B 6
LOGICAL UNIT COMMUNICATION FAILURE
Check cables. Ensure library unit is powered on. Retry command. 00 08 B
LIBRARY COMMUNICATION TIME-OUT
Internal communications not responding. Retry command. Check the
following internal cable connections: Ethernet cable, umbilical cable,
robotics controller, cabinet controller. 01 08 B
INCOMPATIBLE MEDIA
An attempt was made to move media to a destination element that is
incapable of receiving it. Make sure you are using the correct media
and that it is labeled with the correct barcode. 00 30 B
SCSI MESSAGE ERROR
Detected message error in message processing on the SCSI BUS.
• Verify termination.
• Verify SCSI cable connections.
• Check host status.
• Restart system.
00 43 B
SCSI PARITY ERROR
SCSI Parity Error detected.
• Verify termination.
• Verify SCSI cable connections and cable length.
• Check host status.
• Restart the system.
00 47 B
INITIATOR DETECTED ERROR MESSAGE RECEIVED 00 48 B
Sense data values 136