HP ESL E-series Tape Libraries User Manual

Page 130

Message name / description

ASCQ

ASC

Sense
key

CLM HARDWARE FAILURE
CLM failure.

See

Table
22

LOAD PORT DOOR OPEN
Load port door unlocked but failed to open.

SCSI UPGRADE TRANSFER FAILED
A data transfer error or a data storage error was received during the
firmware upgrade.

CABINET CONTROLLER UNABLE TO UPLOAD
Unable to upload firmware to the cabinet controller.

•

Retry the download.

•

Check cable connections.

•

Replace Smart Media and retry.

ROBOTICS CONTROLLER UNABLE TO UPLOAD
Unable to upload firmware to the robotic controller. Verify that the
firmware image is correct and attempt to update again.

I2C BUS COMMUNICATION FAILURE
Unable to communicate with the drive cluster.

•

Check I2C cable connection on the drive cluster.

•

Check that the cluster is powered on.

•

Check the LED status of the cluster controller.

DRIVE COMMUNICATION TIMEOUT
The library is unable to communicate with a drive.

•

Check the I2C cable, the cluster controller, and the cluster backplane
board.

•

Check that the drive is properly seated in the bay.

•

Swap the drive for a known-good drive and retry.

•

Reseat SCSI cabling and termination.

DRIVE UNLOAD FAILED OR TIMED OUT
The command to the drive to unload the tape failed to complete or timed
out. Retry the unload command. If it fails again, manually attempt to eject
the tape.

DRIVE EJECT FAILED OR TIMED OUT
The command to the drive to eject a tape failed to complete or time out.
Retry the unload command. If it fails again, manually attempt to eject the
tape.

DRIVE LOAD FAILED OR TIMED OUT
The command to the drive to load a tape failed to complete or timed out.
Check drive logs for more information.

Sense data values

130