HP ESL E-series Tape Libraries - Manual (Page 66)

Figure 48 Operations screen (primary cabinet)
.
The Library and CLM selections on the Operations screen appears only on a CLM library primary
cabinet.
Figure 49 Operations screen (secondary cabinet)
.
To view or manage the operations information, use the Up and Down buttons to highlight the section
and press Select.
• To toggle the cabinet between online and offline, use the Up and Down arrows to highlight Cab-
inet, then press Select. Use the Up and Down arrows to choose Online or Offline, then press Select.
• To view the CLM firmware revision number, use the Up and Down arrows to highlight CLM, then
press Select. Use the Up and Down arrows to select Details, then press Select again. The firmware
revision appears.
• To display details of each drive, use the Up and Down arrows to highlight Drive #, then press
Select. Use the Up and Down arrows to select Details, then press Select again. Drive details appear.
Diagnostics screen
The Diagnostics screen enables you to perform the following diagnostic tests on the library (see Table
10 ).
Library operations 66