Remove removable magazines, Insert the removable magazine – HP ESL E-series Tape Libraries User Manual
Page 71
3.
From the OCP, open the appropriate load port (right or left).
CAUTION:
Ensure that the load port door is open so that the door's clip is not damaged when the load
port ejects.
a.
From the Status screen, press Ports.
b.
Use the Up and Down buttons to highlight the load port to open, then press Select.
c.
When the curser highlights Open, press Select.
The display will show a note reminding you to open the load port door. If you have not
opened the load port door, do so now.
d.
Press OK to continue.
4.
With the load port open, place the loaded removable magazine in the library.
a.
Place the base of the removable magazine into an empty location on the panel (see
).
b.
Push the top of the removable magazine against the panel until it snaps into place.
1. Empty panel location
2. Removable magazine
Figure 53 Insert the removable magazine
.
5.
Manually close the load port door by pushing the load port assembly into the cabinet. You will
hear a click when it locks into position.
Remove removable magazines
To remove the removable magazines from the library:
1.
From the OCP, open the appropriate load port (right or left).
HP StorageWorks ESL E-Series Tape Library
71