HP ESL E-series Tape Libraries - Manual (Page 138)

Message name / description ASCQ ASC Sense
key
DRIVE REQUIRES CLEANING
Tape drive indicates that drive needs cleaning. Clean the tape drive.
This is returned with element status data, which has no sense key. 01 80 -none-
Table 22 Hardware failure ASCQ values
Description ASCQ
OTHER
Hardware internal failure. Call Technical Support. 00-0F
ENCODER/MOTOR
Check the motor/encoder connector. 10-1F
HOME SENSOR/FLAG
Home sensor/flag failure. Check home sensor connector and flag. 20-2F
MECHANICAL POSITION ERROR
Hardware did not reach appropriate position. The axis path could be obstructed.
Determine the cause of the obstruction. Retry command. If the failure recurs, run
self-test. 30-3F
TIMEOUT
Hardware did not reach appropriate position. The axis rail lubrication may be
insufficient. The axis belt may be too tight. The motor pulley may be loose. Retry
the command. If the failure reoccurs, then run selftest. 40-4F
OVER CONTROL
The hardware is obstructed. Determine the cause of the obstruction. Retry the
command. If the failure reoccurs, then run selftest. 50-5F
FPGA FAILURE
Robotics FPGA has failed. Call Technical Support. 60-6F
POSITIONAL DRIFT
The hardware home position is drifting. Call Technical Support. 70-7F
MAPPING FAILURE
Scanner was unable to detect optical target during calibration. 80-8F
FORCE ERROR
While pushing a cartridge into a bin or drive, the extension axis never made
contact with any object. 90-9F
SENSOR FAILURE
A sensor transition did not occur as expected or an extra transition occurred during
calibration, inventory or pick/place. Retry the command. If the failure recurs,
contact Technical Support. A0-AF
Sense data values 138