Monitoring commands – HP 12000 Virtual Library System EVA Gateway User Manual
Page 140
Table 18 CLI Management Commands (continued)
Usage
1
Command
-y
- Cartridge emulation type (2, 3, ...) (required)
-h
- Displays command usage information (optional)
Restarts the VLS device emulations.
restartEmulations
Restarts Command View VLS.
restartCommandViewVLS
Shuts down and restarts the VLS node.
restartSystem
Shuts down the VLS node so it can be powered off.
shutdownSystem
Shuts down the VLS node so it can be powered off.
shutdownNode
Where the options are:
saveAllConfig
-o
- Saves the VLS virtual library configuration and network settings to the specified
external configuration file.
-h
- Displays command usage information (optional)
Where the options are:
restoreAllConfig
-in
- Restores the VLS virtual library configuration and network settings from the
specified external configuration file.
-h
- Displays command usage information (optional)
1
= string;
Monitoring Commands
Use the CLI commands in
to:
•
View the VLS health status
•
View or delete notification alerts
•
Add, view, or delete E-mail servers to route notification alerts
•
Add, view, or delete E-mail addresses for notification alerts
•
Add, view, or delete SNMP management consoles to receive notification alerts
Table 19 CLI Monitoring Commands
Usage
1
Command
Returns the VLS health status as a number (0-good, 1-degraded, 2-critical, 3-failed,
4-missing).
getHealth
Returns information about the VLS displayed on the Identity Tab window.
getChassis
Returns information on the node. Where the options are:
-a
- Node name (Head_0, ...) (required)
getNode
-h
- Displays command usage information (optional)
Returns the list of nodes in the VLS.
getNodeNames
Returns fault information for the specified node. Where the options are:
-a
- Node name (Head_0, ...) (required)
getNodeFault
-h
- Displays command usage information (optional)
Returns the number of notification messages specified counting back from the most recent.
Where the options are:
-n
- Maximum number of notifications to return (required)
getNotificationsCount
-h
- Displays command usage information (optional)
140 CLI Command Set