HP XP P9500 Storage User Manual
Page 85
Syntax
apply
set
Description
The set subcommand starts or ends monitoring the storage system (i.e., starts or ends collecting
performance statistics). The set subcommand also specifies the gathering interval (interval of
collecting statistics) in short range monitoring.
If you want to use the set subcommand, you must use the login subcommand (see
to log on to SVP. Ensure that the set subcommand executes immediately before the
Export Tool finishes.
Executing the set subcommand generates an error in the following conditions:
•
Some other user is being logged onto SVP in Modify mode.
•
Maintenance operations are being performed at SVP.
If an error occurs, do the following:
•
Ensure that all the users who are logged onto SVP are not in Modify mode. If any user is
logged on in Modify mode, ask the user to switch to View mode.
•
Wait until maintenance operations finish at SVP, so that the set subcommand can execute.
NOTE:
Following are notes of the set command.
◦
Batch files can include script that should execute when an error occurs. For information
about writing such a script in your batch file, see Notes in
◦
When the set subcommand starts or ends the monitoring or changes the gathering interval
after the Monitor Performance window is started, the contents displayed in the Monitor
Performance window does not change automatically in conjunction with the set
subcommand operation. To display the current monitoring status in the Monitor
Performance window, click File, and then click Refresh on the menu bar of the Remote
Web Console main window.
◦
If you change the specified gathering interval during a monitoring, the previously gathered
monitoring data will be deleted.
Syntax
set
[switch={m|off}]
Operands
Description
Operand
To start monitoring, specify the gathering interval (interval of collecting statistics) of monitoring
data at m. Specify a value between 1 and 15 in minutes. m is the gathering interval in short
switch={m|off}
range monitoring by Performance Monitor. The gathering interval in long range is fixed to 15
minutes.
To end monitoring, specify off.
If this operand is omitted, the set subcommand does not make settings for starting or ending
monitoring.
Examples
The following command file saves port statistics and then ends monitoring ports:
Export Tool command reference
85