HP XP P9500 Storage - Manual (Page 105)

Probable causes and recommended action Export Tool messages
The specified subcommand is unavailable. Unable to use the command: command
The specified operand of the group subcommand is unavailable. Unable to use the group name: operand
The Export Tool cannot resolve the host name. Specify the correct host name. Unknown host: host
The Export Tool does not support the specified command. Specify a correct
command. Unsupported command: command
The specified operand is not supported. Correct the specified operand. Unsupported operand: operand
The specified option is not supported. Correct the specified option. Unsupported option: option
Files exist in path. Some file exists in path. What do you do?
clear(c)/update(u)/stop(p) You selected
"action". Is it OK? (y/n)
If you want to clear the files, press the key.
If you want to overwrite the files, press the key.
If you want to stop the operation, press the
key.
When you press a key, a message appears and asks whether to perform
the specified action.
To perform the specified action, press the key.
To cancel the specified action, press the key.
The retry subcommand is written in an incorrect position in the command
file. Specify the following subcommand before
login subcommand: retry
Write the retry subcommand before the login subcommand.
The Export Tool starts collecting data specified by the group subcommand. Start gathering group data Target = xxx,
Total = yyy End gathering group data
The number of target objects is xxx and the total number is yyy (refer to the
example below).
The Export Tool ends collecting data.
NOTE: For example, suppose that the storage system contains 100 parity
groups and the command file contains the following command line: group
PG 1-1:1-2
The Export Tool displays the message "Target=2, Total=100",
which means that the group subcommand specifies two parity groups and
that the total number of parity groups in the storage system is 100.
A syntax error is detected in a command line in your command file. Check
the command line for the syntax error and then correct the script. Syntax error: "line"
Some operands must be enclosed by double quotation marks ("). Check
the command line to find whether double quotation marks are missing.
The export tool version does not correspond to SVP version. Upgrade the
export tool to match the export tool version with SVP version. [login]version unmatched
Troubleshooting the Export Tool 105