HP XP P9500 Storage - Manual (Page 151)

Description Item
This feature does not allow you to select and cancel an individual Cache Residency
data area specified for an LDEV. You must perform a Release operation to cancel
an individual data area.
Adds the requested set operation (place data in Cache Residency cache) to the
LDEV information table. Set
This button is available when you select a data area that is not in cache in the
LDEV table.
This button is unavailable when Cache Residency operations to release data from
cache have been requested. To enable the Set, either perform the requested
release operations, or cancel the requested release operations.
Adds the requested release operation (remove data from Cache Residency cache)
to the LDEV information table. Release
This button is available when you select a data area that is in cache in the LDEV
table.
This button is unavailable when Cache Residency operations to set data into
cache have been requested. To enable the Release, either perform the requested
set operations, or cancel the requested set operations.
Multi Set dialog box
Use this dialog box to select multiple LDEVs with data that you want to place into Cache Residency
cache. The items shown on the Multi Set dialog box reflect the options selected on the Cache
Residency window. Only volumes belonging to the selected CLPR are shown.
Description Item
Number of Cache Residency cache extents that can be created. Num. of Available Cache Residency
Areas
Size of unused Cache Residency caches. Remaining Cache Residency Size
Cache Residency mode (priority or bind) specified by the Cache Residency Mode
option on the Cache Residency window. Cache Residency Mode
Prestaging mode (yes or no) specified by the Prestaging Mode option on the
Cache Residency window. Prestaging Mode
Range of data to be placed into Cache Residency cache. The data range is
specified using the Start and End fields on the Cache Residency window. All is
displayed if the Select All Area box was checked. Range
Multi Set dialog box 151