HP XP P9500 Storage - Manual (Page 75)

Description Operand
specify Port CL3-a:CL3-c, but you cannot specify Port
CL3-c:CL3-a
.
If port-name is not specified, the monitoring data of all the
ports will be exported.
Use this operand when you want to export statistics about
host bus adapters (WWNs) connected to ports, which are PortWWN[[port-name]:[port-name]][…]
displayed in the Monitor Performance window. When
statistics are exported in a ZIP file, the file name will be
PortWWN_dat.zip
. For details on the statistics exported
by this operand, see Table 14 (page 95) .
When you specify variables port-name, you can narrow
the range of ports whose monitoring data are to be
exported. port-name is a port name. The colon (:) indicates
a range. For example, CL3-a:CL3-c indicates ports from
CL3-a to CL3-c.
Ensure that the port-name value on the left of the colon is
smaller than the port-name value on the right of the colon.
The smallest port-name value is CL1-A and the largest
port-name value is CL4-r. The following formula illustrates
which value is smaller than which value:
CL1-A < CL1-B < … < CL2-A < CL2-B < … < CL3-a < CL3-b
< … < CL4-a < … < CL4-r
For example, you can specify PortWWN CL1-C:CL2-A,
but you cannot specify PortWWN CL2-A:CL1-C. Also,
you can specify PortWWN CL3-a:CL3-c, but you cannot
specify PortWWN CL3-c:CL3-a.
If port-name is not specified, the monitoring data of all the
host bus adapters will be exported.
Use this operand when you want to export statistics about
LU paths, which are displayed in the Monitor Performance LU[[port-name.host-group-id]:
[port-name.host-group-id]][…]
window. When statistics are exported in a ZIP file, the file
name will be LU_dat.zip. For details on the statistics
exported by this operand, see
Table 14 (page 95) .
When you specify variables port-name.host-group-id, you
can narrow the range of LU paths whose monitoring data
are to be exported. port-name is a port name. host-group-id
is the ID of a host group (that is, a host storage domain).
The host group (host storage domain) ID must be a
hexadecimal numeral. The colon (:) indicates a range. For
example, CL1-C.01:CL1-C.03 indicates the range from
the host group #01 of the CL1-C port to the host group
#03 of the CL1-C port.
Ensure that the value on the left of the colon is smaller than
the value on the right of the colon. The smallest port-name
value is CL1-A and the largest port-name value is CL4-r.
The following formula illustrates which port-name value is
smaller than which port-name value:
CL1-A < CL1-B < … < CL2-A < CL2-B < … < CL3-a < CL3-b
< … < CL4-a < … < CL4-r
For example, you can specify LU CL1-C.01:CL2-A.01,
but you cannot specify LU CL2-A.01:CL1-C.01. Also,
you can specify LU CL1-C.01:CL1-C.03, but you
cannot specify LU CL1-C.03:CL1-C.01.
If port-name.host-group-id is not specified, the monitoring
data of all the LU paths will be exported.
Use this operand when you want to export statistics about
all host bus adapters connected to ports, which are PPCGWWN[[Monitor-target-name]:
[Monitor-target-name]][…]
Export Tool command reference 75