HP XP P9500 Storage User Manual
Page 76
Description
Operand
displayed in the Monitor Performance window. When
statistics are exported in a ZIP file, the file name will be
PPCGWWN_dat.zip
. For details on the statistics exported
by this operand, see
.
When you specify variables monitor-target-name, you can
narrow the range of monitoring target groups whose
monitoring data are to be exported. Monitor-target-name
is the name of an monitoring target group. If the name
includes any non-alphanumeric character, the name must
be enclosed by double quotation marks ("). The colon (:)
indicates a range. For example, Grp01:Grp03 indicates
a range of SPM groups from Grp01 to Grp03.
Ensure that the monitor-target-name value on the left of the
colon is smaller than the monitor-target-name value on the
right of the colon. Numerals are smaller than letters and
lowercase letters are smaller than uppercase letters. In the
following formulae, values are arranged so that smaller
values are on the left and larger values are on the right:
•
0 < 1 < 2 < …< 9 < a < b < …< z < A < B < … < Z
•
cygnus < raid < Cancer < Pisces < RAID < RAID5
If monitor-target-name is not specified, the monitoring data
of all the host bus adapters will be exported.
Use this operand when you want to export statistics about
remote copy operations which are displayed in the Usage
RemoteCopy
Monitor tab in the Continuous Access Synchronous and
Continuous Access Synchronous Z window. By using this
operand, you can export monitoring data about remote
copy operations performed by Continuous Access
Synchronous and Continuous Access Synchronous Z in the
whole volumes. When statistics are exported to a ZIP file,
the file name will be RemoteCopy_dat.zip. For details
on the statistics exported by this operand, see
.
Use this operand when you want to export statistics about
remote copy operations displayed in the Usage Monitor
RCLU[[port-name.host-group-id]
:[port-name.host-group-id]][…]
tab in the Cnt Ac-S and Continuous Access Synchronous
Z window. By using this operand, you can export
monitoring data about remote copy operations performed
by Continuous Access Synchronous and Continuous Access
Synchronous Z at each volume (LU). When statistics are
exported to a ZIP file, the file name will be
RCLU_dat.zip
. For details on the statistics exported by
this operand, see
When you specify variables
port-name.host-group-id
, you can narrow the range
of LU paths whose monitoring data are to be exported,
where port-name is a port name andhost-group-id
is the ID of a host group. The host group ID must be a
hexadecimal numeral. The colon (:) indicates a range. For
example, CL1-C.01:CL1-C.03 indicates the range from
the host group #01 of the CL1-C port to the host group
#03 of the CL1-C port.
Ensure that the value on the left of the colon is smaller than
the value on the right of the colon. The smallest port-name
value is CL1-A and the largest port-name value is CL4-r.
The following formula illustrates which port-name value is
smaller than which port-name value:
CL1-A < CL1-B < … < CL2-A < CL2-B < … < CL3-a < CL3-b
< … < CL4-a < … < CL4-r
76
Export Tool