If yes, go to table e-7 – HP ProLiant DL760 G2 Server User Manual
Page 283

Troubleshooting Information
Table E-7: Are either of the Processor Board attention LED’s located on the front
bezel illuminated?
Status Action
Processor board 1 attention LED is illuminated
and processor board 2 is not installed.
•
Check interconnect LEDs on the I/O lid to
see if board is seated.
•
If processors were just added, be sure that
all processors on the board are the same
cache size and speed.
•
Check connector for bent pins.
Processor board 1 attention LED is illuminated
and processor board 2 is installed.
•
Check interconnect LEDs on the I/O lid to
see if board is seated.
•
If processors were just added, be sure that
all processors on the board are the same
cache size and speed.
•
Check connector for bent pins.
•
If video is available, look for additional
information contained within the POST
error messages.
Processor board 2 attention LED is illuminated
and processor board 1 is not installed.
Move processor board to slot 1 and retry
applying power.
continued
HP ProLiant DL760 Generation 2 Server User Guide
E-15
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: o-appe Troubleshooting Information.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 10:42 AM