HP ProLiant DL760 G2 Server - Manual (Page 123)

Installing Hardware Options, Hot-Pluggable
Accessing the DIMMs
To access the DIMMs in the server, you must remove the memory cartridge. The Hot
Plug RAID Memory cartridge is designed to allow replacing, adding, or upgrading of
memory while the system is online.
Removing the Memory Cartridge
To remove a memory cartridge from the ProLiant DL760 G2 server:
1. Unlock the memory cartridge by rotating the cartridge lock counterclockwise (1)
as shown in Figure 5-4.
IMPORTANT: If the memory cartridge is not required for continued operation (with at
least four other memory cartridges installed, online, and error free), the memory cartridge
power LED will go off.
If the cartridge is required for continued operation, an audible caution alarm will sound and
the memory cartridge attention LED will blink until the cartridge is locked again.
5-8 HP ProLiant DL760 Generation 2 Server User Guide
HP CONFIDENTIAL
Writer: Bryce Miller File Name: f-ch5 Installing Options-Hot Pluggable.doc
Codename: Comet Part Number: 201264-001 Last Saved On: 6/17/03 9:47 AM