HP 9100c Digital Sender series - Manual (Page 87)

EN Configuring the target program 85
Setting automatic start capabilities
This setting controls whether or not the target program starts
automatically when documents are sent to your computer.
If you enable this setting, the target program automatically starts and
displays a scanned document after the document arrives at the
default inbox location. If you disable this setting, the scanned
document remains in the default inbox location as a saved file and is
displayed in the target program only after you start the program
yourself.
To set automatic start capabilities
1 In the Control Panel applet, click the Desktop tab.
2 To enable the target program to start automatically, select the
Automatic execution check box.
- Or -
To disable the automatic start setting, clear the check box.
3 Click OK.