HP 9100c Digital Sender series - Manual (Page 56)

54 Chapter 3 - Using the HP Address Book Manager EN
Starting the HP Address Book Manager
When you start the ABM, a dialog box appears that requires you to
log in. You will need to know the DNS name or Internet protocol (IP)
address of the digital sender you use. In addition, you must be a
registered user.
If you have never used the ABM before, you must add yourself as a
registered user or have the administrator do it. See “Adding a
registered user profile” on page 13.
To start the ABM and log in
Note The digital sender must be on in order for you log in to and use the ABM.
1 Start the ABM in one of the following ways:
• Click Start, point to Programs, then HP 9100C, and click HP
Address Book Manager.
• If the HP Digital Sender Link icon is showing in the taskbar,
right-click it and choose HP Address Book Manager.
2 If the DNS name or IP address for the digital sender you want is
not in the Digital Sender name field, type it or choose it from the
list.
3 If your user name is not in the User name field, type it or choose
it from the list.
4 In the User password field, type your password (if one is
defined).
5 Click OK. If all of the login information is valid, the ABM main
window appears.