Quick-start tutorial, Using the abm to add an e-mail address – HP 9100c Digital Sender series User Manual
Page 22

20 Chapter 1 - Getting started
EN
Quick-start tutorial
Use this tutorial to get started with some basic tasks: logging in to the
ABM and using it to add an e-mail address, loading a document,
logging in to the digital sender, and e-mailing.
Using the ABM to add an e-mail address
Using the ABM at your computer, you can add e-mail addresses.
These e-mail addresses are available whenever you want to e-mail
documents from the digital sender.
In order to use the ABM, you or the administrator must have
established your user profile. If you have not already done so, see
“Adding a registered user profile” on page 13.
To log in to the ABM
Note
The digital sender must be on in order for you log in to and use the ABM.
1
On the taskbar, right-click
and choose HP Address Book
Manager.
2
If the DNS name or IP address for the digital sender you want is
not in the Digital Sender name field, type it in. Ask the
administrator if you do not know this information.
3
If your user name is not in the User name field, type it in.
4
In the User password field, type your password (if one is
defined).
5
Click OK. If all of the login information is valid, the ABM main
window appears.
6
Go to “To add an e-mail address” below.