HP 9100c Digital Sender series - Manual (Page 25)

EN Quick-start tutorial 23
Logging in to the digital sender
If the main screen appears on the control panel display, guest usage
is enabled and you do not have to log in. You can go to the next
section.
If the Digital Sender login screen appears on the control panel
display, only registered users can use the digital sender. You must log
in as a registered user before proceeding. Depending on the security
level, your profile might need to be validated by the administrator
before you can use it. If this is the case, you will receive an error
message when you try to log in.
To log in to the digital sender
1 At the HP 9100C Login screen, type your registered user name in
the NAME field and press
.
2 If a password is set in your user profile, type it in the PASSWORD
field. Your password is case sensitive and must be typed exactly
as it appears in your user profile.
3 Press .
Once you are logged in as a registered user, you have access to
control panel functions, the public address books, and your private
address books. You can also access more detailed activity log
information using the ABM at your computer.