Sending to an hp jetsend-enabled device, Choosing or adding hp jetsend-enabled devices – HP 9100c Digital Sender series User Manual
Page 49
EN
Sending to an HP JetSend-enabled device 47
Sending to an HP JetSend-enabled device
If you see a function key labeled
J
ET
S
END
, you can send documents
to JetSend-enabled devices.
HP JetSend is a communications technology built into printer and
scanner firmware and computer software. HP JetSend-enabled
devices can connect, “talk” to each other, and exchange information
directly from the network. It is server- and program-independent.
The digital sender is an HP JetSend-enabled device. You can use its
HP JetSend capabilities with the following types of devices:
printers on your company intranet that are HP JetSend enabled.
computers with HP JetSend for Windows software installed. You
can download a free copy of the HP JetSend for Windows
software for Windows NT or 95 from the HP JetSend website at
www.jetsend.hp.com.
Both types of devices must also have valid TCP/IP addresses.
Choosing or adding HP JetSend-enabled
devices
When you press
J
ET
S
END
at the digital sender, a list of HP JetSend-
enabled devices appears. (The list contains up to 64 devices.) You
can choose a device from the list, or you can add a device.
To add a device to the list
1
Press
J
ET
S
END
. The list of HP JetSend-enabled devices appears.
2
Press
N
EW
.
3
Type the DNS name or IP address for the HP JetSend-enabled
device you want to add. If you do not know this information, check
with the administrator.
4
Press
O
K
. The device is added to the list.
Note
Once the list contains 64 devices, the
N
EW
key disappears. Before
adding more devices, you must delete at least one existing device from
the list. To delete a device, use the and keys to select it and press
D
ELETE
.