HP 9100c Digital Sender series - Manual (Page 128)

126 Appendix A - Specifications EN
Declaration of Conformity
EC Declaration of Conformity
According to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Hewlett-Packard Italiana S.p.A.
Manufacturer’s Address: Viale Europa, 2
24040 Stezzano (BG)
ITALY
Declares that the product
Product Name: HP 9100C Digital Sender
Model Numbers: C1313A, C1314A, C1315A, C1316A
Product Options: All
Conforms to the following specifications:
SAFETY IEC 950:1991 +A1+A2+A3+A4 / EN 60950:1992 +A1+A2+A3+A4
IEC 825-1:1993 / EN 60825-1:1994
Class 1
EMC CISPR 22:1993+A1 / EN 55022:1994 Class A
EN 50082-1:1992
IEC 801-2:1991 / prEN 55024-2:1992 ± 4 KV CD; ± 8 KV AD
IEC 801-3:1984 / prEN 55024-3:1991 3 V/m
IEC 801-4:1988 / prEN 55024-4:1992 ± 0.5 KV signal lines
± 1.0 KV power lines
IEC 1000-4-3:1995 / EN 61000-4-3:1996 3 V/m
IEC 1000-4-5:1995 / EN 61000-4-5:1996 ± 1.0 KV differential
± 2.0 KV common
IEC 1000-3-2:1995 / EN 61000-3-2:1995
IEC 1000-3-3:1994 / EN 61000-3-3:1995
AS/NZS 3548:1992 / CISPR 22:1993 + A1 Class A
Supplementary information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and
the EMC Directive 89/336/EEC and carries the CE-marking accordingly.
The product was tested in a typical configuration with Hewlett-Packard test systems.
Bergamo, 30 June 1998
__________________________________
Tiberio Tesi - Quality Assurance Manager
European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department
HQ-TRE, Herrenberger Straße 130, D71034 Böblingen (Fax: +49-7031-3134)
Australian Contact: Product Regulation Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria
3130 - Australia