HP Insight Management-Software - Manual (Page 79)

the last connection to the first connection. If the maximum number of FCoE connections is
reached, an error message is displayed.
NOTE: Keep the following in mind:
•
If there are no SAN fabrics using the HP VC FlexFabric 10 Gb/24-port module uplink
ports, the FCoE connections can be configured as unassigned.
•
A server profile with boot target configurations can only have one FC, FCoE, or iSCSI
primary and secondary boot types.
12. You can create a single server profile, or multiple server profiles. To create a single server
profile, select Single Profile as displayed in Figure 38 .
Figure 38 Selecting a server profile option
You can either leave the profile unassigned or click Select Location to make an assignment.
A table is displayed allowing you to select a domain and enclosure and also select the bays
you want associated with the profile. Click OK to create the profiles and a profile list is
displayed. Click OK to accept the assignments.
13. In addition to creating a single server profile, you can create multiple profiles at the same time
and decide to leave a number of profiles with an unassigned status, or assign those server
profiles to bays. Choose from one of the multiple server profile options:
1. Select Assign server profiles to specific server bays and click Select Location to make the
assignments. A window opens allowing you to select a domain and enclosure and all
the bays associated with the enclosure. Click OK to create the profile and a profile list is
displayed. Click OK to accept the assignments.
2. Select Leave server profiles unassigned for now and pick the number of profiles you want
to create (up to 50). The server profile names are automatically generated based on the
server profile prefix. Click Select Location to select more bays or delete bays. Click OK
to create the profiles.
Creating a server profile 79