HP Insight Management-Software - Manual (Page 97)

To see more information about bays, select the Show more details check box. The following table
describes the additional information that will be displayed.
Description Item
Model of server Server model
Server is powered-up or powered-down Power
Reports if the identification light on the device is
powered-up or powered-down UID
To see server bay status and blade server information (if there is a server in a selected bay), click
the bay number, then a status window appears. The following table lists the additional information
that appears.
Description Item
Server profile name assigned to the bay Assigned Server Profile
Enclosure name where the bay is located. Enclosure Name
Icon that indicates the Unit Identifier (UID) state: on, off, or
not available UID
Icon that indicates the server power status Power Status/Control
Factory serial number for physical server Serial Number
Logical Serial Number designated by server profile Serial Number (Logical)
Factory UUID for physical server UUID
Logical UUID designated by server profile UUID (Logical)
Model of server Product Name
The multiblade system contains information regarding the
device bays which compose the multiblade system. The Multiblade System Devices
information describes which bay contains the monarch
server and which bays contain auxiliary servers. The
following is an example of a four blade multiblade system:
Multiblade system size-4
Bay 1 - Monarch
Bay 2 - (Auxiliary Blade)
Bay 3 - (Auxiliary Blade)
Bay 4 - (Auxiliary Blade)
The following is an example of two blades in a multiblade
system:
Multiblade system size-2
Bay 3 - Monarch
Bay 4 - (Auxiliary Blade)
From the Bay screen, you can perform the following tasks:
•
Power down a bay
•
Assign a server profile to a bay
•
Unassign a server profile from a bay
•
Designate spare bays
•
Perform a Server Profile Failover from the Bays page
97