HP Insight Management-Software - Manual (Page 29)

For a VC Domain to be part of a VC Domain Group with Virtual Connect firmware 3.15 – 3.18,
3.10, 3.0x, 2.3x, and 2.1x, Hybrid VLAN Tagging, Network Access Groups, Port Throughput
Statistics, Custom Module Host Names, Extended Mapped VLANs, and iSCSI Boot Assistant are not
supported, as follows:
•
Hybrid VLAN Tagging in a VC Domain is not supported.
VLAN tunneling must be uniformly enabled or disabled for all networks in the domain. Older
versions of Virtual Connect do not support mixed configurations of enabled and disabled
VLAN tunneling within a domain. In addition, profiles cannot contain Ethernet connections
configured to use multiple networks. The Figures 6 and 7 below show the VLAN Tunneling
setting and the Multiple networks setting.
Figure 7 Ethernet Network using different Enable VLAN Tunneling settings
Figure 8 Server Profile with Ethernet Adapter Connections using Multiple Networks
Requirements for adding a VC Domain to a VC Domain Group 29