HP Insight Management-Software - Manual (Page 81)

•
VLAN Id
•
Color
•
Label
The second drop-down box defaults to Contains and you can enter part of a filter such as
Name or Shared Uplink Set. If you choose Color, the drop-down box defaults to Is.
3. Click the Force same VLAN mappings as Shared Uplink Set check box to enable or disable it
depending on your base configuration.
Figure 40 displays the options.
Figure 40 Force same VLAN mappings as Shared Uplink Set options
4. Click the right-arrow to add the network to your configuration. To remove networks press the
left-arrow. You can select all the VLAN networks available, but only 162 VLAN networks are
accepted. A message is displayed warning about this limit. The 162 VLAN networks feature
is made available with Extended Mapped VLAN capability and is contained in VC Domains
with VC firmware 3.30 or later.
5. Click OK to save the configuration.
Configuring Network Port Speed
When creating or editing a server profile, you can configure the network speed of an Ethernet
network connection. You can select network speed parameters using the Preferred, Custom, or
Disabled options.
1.
In the Ethernet connections table, select the desired port speed from the Port Speed Setting
menu.
Configuring Network Port Speed 81