HP Storage Mirroring Software - Manual (Page 92)

7 - 11
Managing Mirroring Using the Text Client
For each of the mirroring commands, first identify which source you are working with by using the source command.
Initiating a mirror on connection
1. If you do not know which replication set you will be connecting to the target machine, the repset list command will
display the available replication sets for that source.
2. Connect the replication set to the target by using the connect command. To initiate mirroring when the connection is
established, specify the mirror switch with this command. By default, mirroring is started automatically.
Command SOURCE
Description Identifies a machine as the active source machine
Syntax SOURCE < source_machine >
Options source_machine —Name of the machine
Examples source indy
Command REPSET LIST
Description Lists all replication set names for the currently selected source
Syntax REPSET LIST
Command CONNECT
Description Establishes a connection between a replication set and a target machine
Syntax CONNECT < repset > TO < target_machine > MAP EXACT | BASE < target_path > |< source_path > TO
< target_path > [,...] [MIRROR | NOMIRROR] [, REPLICATE | NOREPLICATE]
[, MONITOR | NOMONITOR][, ORPHANS | NOORPHANS]