HP Storage Mirroring Software - Manual (Page 271)

A - 8
Help
Limit Bandwidth
Load Source
Load Target
Command HELP
Description Displays the DTCL commands and their syntax
Syntax HELP
Notes ! Press any key to scroll through the list of commands.
! Press q to exit the help function.
! You can also type dtcl help from the directory where the Storage Mirroring program files are
installed to display the DTCL commands and their syntax.
Command LIMIT BANDWIDTH
Description Sets bandwidth restrictions for transmitting data from the source to the target
Syntax LIMIT BANDWIDTH < bytes >, < seconds > TO < target_machine >
Options ! bytes —Number of bytes to be transmitted
! seconds —Maximum number of seconds to wait before transmitting again
! target_machine —Name of the target machine
Examples limit bandwidth 19300, 5 to jersey
Notes This command transmits in bursts, not bytes per seconds. The time identifies how long to wait
before transmitting again. For example, if 5 seconds are specified and it only takes 2 seconds to send
the specified bytes, Storage Mirroring will wait an additional 3 seconds before transmitting again.
Command LOAD SOURCE
Description Loads the Storage Mirroring source module
Syntax LOAD SOURCE < machine >
Options machine —Name of the machine
Examples load source indy
Command LOAD TARGET
Description Loads the Storage Mirroring target module
Syntax LOAD TARGET < machine >
Options machine —Name of the machine
Examples load target jersey