HP Storage Mirroring Software - Manual (Page 129)

10 - 5
Setting transmission start criteria
Transmission start criteria initiates Storage Mirroring data transmission which continues until the queue is empty or a
transmission stop criteria is met.
1. Select the Start option in the Limit Type box.
2. Define the start options for Storage Mirroring transmission by using any combination of the following options:
! Transmission session start —Specify a Date and Time to start transmitting data. The down arrow next to the date
field displays a calendar allowing easy selection of any date. The time field is formatted for any AM or PM time.
! Session Interval —You can also specify an interval for additional transmissions by indicating a length of time and
choosing minutes, hours, or days.
! Queue Threshold (percentage) —Specify a percentage of the disk queue and system memory that must be in use to
initiate the transmission process.
! Queue threshold (bytes) —Specify the number of bytes that must be in the source queue and system memory to
initiate the transmission process.
3. If no additional transmission options need to be set, establish the connection by clicking Connect .