HP Storage Mirroring Software - Manual (Page 247)

14 - 21
MoveOrphanedFiles Specifies if orphaned files are deleted or moved to the directory specified by MoveOrphansDir
Values: ( 1 ) Move
(0) Delete
Default: 0
GUI Setting : Connection/Restoration Manager, Orphans tab, Move/Delete Orphan Files
MoveOrphansDir Indicates the name of the directory where orphaned files will be moved if MoveOrphanedFiles= 1
Values: any valid path
Default: the location where the Storage Mirroring files were installed
GUI Setting : Connection/Restoration Manager, Orphans tab, Move Orphaned Files to following
location
NameFailover Specifies whether or not to failover machine names
Values: ( 0 ) Do not failover machine names
( 1 ) Failover machine names
Default: 1
GUI Setting : Failover Control Center, Monitor Settings, Items to Failover, Server Name
NetPort Port connection for TCP communications
Values: 1025 - 65535
Default: 1100
GUI Setting : Server Properties, Network tab, Interface, Service Listen Port
If you change this value, the source service must be stopped and restarted to implement the
change.
NetworkRetry Specifies the interval, in seconds, at which Storage Mirroring will attempt to reconnect to the
target
Values: any positive number
Default: 10
GUI Setting : None
NetworkStatus
Interval This entry is no longer used.
NetworkTimeout The maximum length of time, in seconds, to wait on a network connection. If data is not
received over a network connection within the specified time limit, the connection is closed.
During idle periods, Storage Mirroring sends small amounts of keep-alive data at an interval 1/6 of
the NetworkTimeout value to keep the socket from being inadvertently closed.
Values: any integer
Default: 120
GUI Setting : None
PingFrequency Specifies, in seconds, how often a ping is sent to the source from a monitoring target
Values: 1 - 65535
Default : 5
GUI Setting : Failover Control Center, Monitor Settings, Monitor Interval
PlaceHolderAdapters For Windows NT 4, the name of the NIC adapter
Values: determined by the NIC installation
Default: determined by the NIC installation
GUI Setting : Failover Control Center, Settings, Placeholders
Program Setting Description