HP Storage Mirroring Software - Manual (Page 275)

A - 12
Mirror Stop
Monitor Clear
Monitor Create
Monitor Delete
Command MIRROR STOP
Description Stops a paused mirror
Syntax MIRROR STOP < con_id | * >
Options ! con_id —Connection ID assigned to the source/target connection
! *—Specifies all connection IDs
Examples ! mirror stop 1
! mirror stop *
Command MONITOR CLEAR
Description Clears all of the failover configuration and monitoring parameters for the specified monitor
machine
Syntax MONITOR CLEAR [ monitor ]
Options monitor —Name of the source machine designated as the monitor
Examples monitor clear indy
Notes If you do not specify a monitor, the current source designated as the monitor will be used. If you
have not identified a monitor, you will receive an error message stating that a monitor has not been
selected.
Command MONITOR CREATE
Description Establishes a source machine as a failover monitor. This is the machine that will be monitored by a
target machine in case it should experience a failure.
Syntax MONITOR CREATE < source_machine >
Options source_machine —Name of the machine
Examples monitor create indy
Command MONITOR DELETE
Description Deletes the specified failover monitor and all of its parameters
Syntax MONITOR DELETE < monitor >
Options monitor —Name of the source machine designated as the monitor
Examples monitor delete indy