HP Storage Mirroring Software - Manual (Page 119)

9 - 7
Verification log
A verification log is created during the verification process. The log details what is verified as well as which files are not
synchronized. Use the following steps to set up your verification log in the Management Console.
1. Right-click a source machine on the left pane of the Management Console and select Properties .
2. Select the Logging tab.
3. At the top of the window, Folder identifies the location where the log files identified on this tab are stored.
4. Under the Verification section, Filename contains the log file for the verification process. Update this field, if necessary.
The default is DTVerify.log .
5. Specify the Maximum Length of the log file. The default is 1048576 bytes ( 1 MB).
6. By default, the log is appended each time a verification process is completed. Clear the Append check box if you do not
want to append to the previous log file.
NOTE: All changes to a verification log should be made on the source side of a connection.
NOTE: Changes made to the verification log in the Server Properties, Logging tab will apply to all connections
from the current source machine.