Storage mirroring text client program settings – HP Storage Mirroring Software User Manual
Page 237
14
-
11
Storage Mirroring Text Client program settings
The following table contains a complete listing of each Storage Mirroring program setting.
Program Setting
Description
ActivationCode
16-character Storage Mirroring activation code
Values:
Found on registration card, if not an evaluation copy
Default:
n/a
GUI Setting
: Server Properties, General tab, License, Activation Code
AdapterFlags
Specifies the adapter to use when establishing a connection
Values:
(
1
)
Compression
(
2
) Encryption
(
4
) Network Data Representation
Default:
4
GUI Setting
: None
Compression is no longer used. This option should not be changed.
Advertisement
Indicates how the Management Console populates the server tree
Values:
(
1
)
Uses the Storage Mirroring heartbeat
(
4
) Uses Windows 200x Active Directory
(
5
) Uses both the Storage Mirroring hearbeat and Windows 200x Active Directory
Default:
5
GUI Setting
: Management Console, File, Options, Configuration tab, Automatic Service
Discovery
Changes to this setting require the Storage Mirroring service to be restarted for the change to
take effect. If Active Directory Advertisement is enabled (set to
4
or
5
), there is a 200 byte
impact on the Active Directory service for each server that registers. The Storage Mirroring
service registers with Active Directory at startup and unregisters at shutdown.
AllFailover
Specifies which IP addresses to failover
Values:
(
0
)
Failover only monitored IP addresses
(
1
) Failover all IP addresses
Default:
1
GUI Setting
: Failover Control Center, Monitor Settings, Items to Failover, IP Address(es)
AllMustFail
Specifies whether or not all IP addresses must fail for failover to take place
Values:
(
0
) any IP address can fail
(
1
)All IP addresses must fail
Default:
1
GUI Setting
: Failover Control Center, Monitor Settings, Failover Trigger, All Monitored IP
Addresses Fail
AutoReconnect
Specifies whether to reinstate the target connection(s) when the source machine is brought
online after a source machine failure
Values:
(
0
) Do not reconnect
(
1
) Reconnect
Default:
1
GUI Setting
: Server Properties, Setup tab, Source Module Startup Options, Automatically
Reconnect During Source Initialization