HP Storage Mirroring Software - Manual (Page 158)

11 - 19
4. Select the failed source and click Failback . If you specified a pre-failback script in your failover configuration, that script
will be executed at this time.
5. You will be prompted to determine if you want to continue monitoring the source. Bring the source online and select
Continue or Stop to indicate if you want to continue monitoring the source.
After you have selected whether or not to continue monitoring the source machine, the source post-failback script, if
configured, will be started.
Failback is now complete. If you need to restore newer files from the target to the source, see Restoring Storage Mirroring
Data Through the Management Console on page 12-5.
NOTE: At this time, the source machine must be online and Storage Mirroring must be running to ensure that the
source post-failback script can be started. If the source has not completed its boot process, the command
to start the script may be lost and the script will not be initiated.