HP Storage Mirroring Software User Manual
Page 167
11
-
28
12.
Start monitoring by using the
monitor start
command.
13.
If after starting a monitor you need to stop it, use the
monitor stop
command.
Storage Mirroring version 4.3
Source Machine: indy (Access Level: FULL)
- Monitor settings for indy -
Flags: ADD, USESHAREFILE, FAILALL
Target Pre-Failover script:c:\scripts\preover.txt
Target Post-Failover script:c:\scripts\postover.txt
Target Pre-Failback script:c:\scripts\preback.txt
Target Post-Failback script:c:\scripts\postback.txt
Source Post-Failback script:c:\scripts\src_postback.txt
(press any key)
> monitor script add prefailback c:\scripts\preback.txt
> monitor script add postfailback c:\scripts\postback.txt
> monitor script add srcpostfailback c:\scripts\src_postback.txt
> monitor display
Command
MONITOR START
Description
The configured failover target starts monitoring the source machine that was designated as the
monitor.
Syntax
MONITOR START <
monitor
> [ON <
target_machine
>]
Options
!
monitor
—Name of the source machine designated as the monitor
!
target_machine
—Name of the target machine that will be monitoring the source machine
Examples
monitor start indy on jersey
Command
MONITOR STOP
Description
Stops monitoring the source machine for a failure
Syntax
MONITOR STOP <
monitor
> [ON <
target_machine
>]
Options
!
monitor
—Name of the source machine designated as the monitor
!
target_machine
—Name of the target machine that will no longer be monitoring the source
machine
Examples
monitor stop indy on jersey