HP Storage Mirroring Software - Manual (Page 81)

6 - 18
Configuring auto-reconnect
If Storage Mirroring is stopped on a source machine while a Storage Mirroring connection is active, auto-reconnect will
automatically reestablish the connection, without manual intervention by the administrator, when the Storage Mirroring
source is available . When an auto-reconnect is performed, you may want to perform an auto-remirror to guarantee data
integrity. Use the instructions below for both the auto-reconnect and auto-remirror options.
1. To determine the current auto-reconnect setting, use the get command with the AutoReconnect option.
2. To modify the auto-reconnect setting, use the set command with the AutoReconnect option. The AutoReconnect
option is set to 1 for enabled or 0 for disabled. By default, auto-reconnect is enabled.
3. To determine the current auto-remirror setting, use the get command with the AutoRemirror option.
4. To modify the Storage Mirroring auto-remirror setting, use the set command with the AutoRemirror option. The
AutoRemirror option is set to 1 for enabled or 0 for disabled. By default, auto-remirror is enabled.
Command GET
Description The Text Client/DTCL sends a request to Storage Mirroring to return the value of a Storage
Mirroring program setting. The setting is retrieved by Storage Mirroring from the registry.
Syntax GET < option > [ machine ]
Options ! option —See Storage Mirroring Text Client program settings on page 14-11.
! machine —Name of the machine
Examples ! get netport
! get VerifyLogName
! get DefaultAddress
Notes If you do not specify a machine name, the value from the current source will be returned. If you
have not identified an active source, no data will be returned.
Command SET
Description The Text Client/DTCL sends a request to Storage Mirroring to modify the value of a Storage
Mirroring program setting. The setting is immediately applied and is then forwarded to the registry
where it is also applied.
Syntax SET < option >=< value > [ machine ]
Options ! option —See Storage Mirroring Text Client program settings on page 14-11.
! value —See Storage Mirroring Text Client program settings on page 14-11.
! machine —Name of the machine
Examples ! set netport=1100
! set VerifyLogName=”HA server.log”
! set DefaultAddress=”129.12.34.3”
Notes ! Some settings, although immediately applied to Storage Mirroring, will not take effect until the
client or service is restarted. For example, the Text Client must be closed and reopened for a
change to ClientLogName to take effect. And the service must be restarted to cause a change in
the modules loaded if the LoadSourceTarget setting is changed. See
Storage Mirroring Text Client
program settings on page 14-11 for details on each configuration option.
! If you do not specify a machine name, the value from the current source will be updated. If you
have not identified an active source, no changes will be made.