HP Storage Mirroring Software User Manual
Page 200
13
-
20
Service
4038
Error
Error verifying the product code. The
product functionality has been disabled.
Reinstall the software, using the
installation Repair option, to install a new
copy of the RSResource.dll. Contact
technical support if this error persists.
4039
Error
Error while reading RSResource.dll. The
product functionality has been disabled.
Reinstall the software, using the
installation Repair option, to install a new
copy of the RSResource.dll. Contact
technical support if this error persists.
4040
Error
The product code is illegal for this
computer hardware. The product
functionality has been disabled.
Reinstall the software, using the
installation Repair option, to install a new
copy of the RSResource.dll. Contact
technical support if this error persists.
4041
Error
The product code is illegal for this
operating system version. The product
functionality has been disabled.
Reinstall the software, using the
installation Repair option, to install a new
copy of the RSResource.dll. Contact
technical support if this error persists.
4042
Error
The product code requires installing the
Windows Server Appliance Kit. The
product functionality has been disabled.
Reinstall the software, using the
installation Repair option, to install a new
copy of the RSResource.dll. Contact
technical support if this error persists.
4043
Error
This product can only be run on a limited
number of processors and this server
exceeds the limit. The product
functionality has been disabled.
Reinstall the software, using the
installation Repair option, to install a new
copy of the RSResource.dll. Contact
technical support if this error persists.
4044
Error
An error was encountered and replication
has been stopped. It is necessary to stop
and restart the service to correct this
error.
Contact technical support if this error
persists.
4045
Error
This service failed to start because of a
possible port conflict. Win32 error: %1
Verify that the Storage Mirroring ports are
not conflicting with ports used by other
applications.
4110
Warning
Target can not write %1 due to target disk
being full. Operation will be retried (%2
times or forever)
The disk on the target is full. The
operation will be retried according to the
TGExecutionRetryLimit setting.
4111
Warning
Target can not write %1 due to a sharing
violation. Operation will be retried (%2
times or forever)
A sharing violation error is prohibiting
Storage Mirroring from writing on the
target. The operation will be retried
according to the TGExecutionRetryLimit
setting.
4112
Warning
Target can not write %1 due to access
denied. Operation will be retried (%2
times or forever)
An access denied error is prohibiting
Storage Mirroring from writing on the
target. The operation will be retried
according to the TGExecutionRetryLimit
setting.
4113
Warning
Target can not write %1 due to an
unknown reason. Operation will be
retried (%2 times or forever). Please
check the log files for further information
on the error.
An unknown error is prohibiting Storage
Mirroring from writing on the target. The
operation will be retried according to the
TGExecutionRetryLimit setting.
4120
Info
Target write to %1 was completed
successfully after %2 retries.
No action required.
4150
Error
Target write %1 failed after %2 retries and
will be discarded. See the event log or log
files for error conditions. After correcting
the problem, you should re-mirror or run
a verify to resynchronize the changes.
The operation has been retried according
to the TGExecutionRetryLimit setting but
was not able to be written to the target
and the operation was discarded. Correct
the problem and remirror the files.
Category
ID
Severity
Message
Required Response