HP Storage Mirroring Software - Manual (Page 229)

14 - 3
Setup options
The Setup tab consists of settings that are initialized when Storage Mirroring is started.
! Log Statistics Automatically —This check box indicates whether Storage Mirroring statistics logging, which logs to the
statistic.sts file, will start when Storage Mirroring is started. For detailed information on the Storage Mirroring
statistics logging, see DTStat on page 13-26.
! Enable Task Command Processing —This check box indicates whether task command can be processed on this server.
If this setting is disabled and the server is a source, you can still submit tasks to be processed on the target, although task
command processing must be enabled on the target. For more information, see
Processing Task Commands on page 8-6.
! Advertise service with Active Directory— This check box indicates whether the Storage Mirroring service will register
with Windows 200x Active Directory when the Storage Mirroring service is started. For more information, see Windows
200x Active Directory on page 15-7.
! Automatically Reconnect During Source Initialization—This check box indicates whether an auto-reconnect is
to be performed if a source fails while a connection is established. For detailed information on the auto-reconnect feature,
see
Auto-Disconnect and Auto-Reconnect on page 6-6.
! Perform Remirror After Auto-reconnect—This check box indicates whether a remirror will be performed
automatically after an auto-reconnect has occurred. For detailed information on the auto-remirror feature, see
Auto-Remirror on page 7-4.