HP Storage Mirroring Software - Manual (Page 30)

2 - 7
Storage Mirroring server ports
The Storage Mirroring service uses three ports for Storage Mirroring communications.
! Service Listen Port —The Storage Mirroring server uses this port to listen for commands from other Storage Mirroring
servers.
! Heartbeat Transmit Port —The Storage Mirroring server uses this port to transmit heartbeats.
! Staus Listen Port —The Storage Mirroring server uses this port to listen for requests to update at-a-glance monitoring
from the Storage Mirroring Management Console.
1. Right-click a machine on the left pane of the Management Console and select Properties .
2. On the Network tab, modify the Service Listen Port , Heartbeat Transmit Port and/or the Status Listen Port and
specify the number that you want to assign to the ports. The default values are 1100, 1100 and 1105, respectively. The
valid values are
1025 to 65535 .
3. Click OK to save the settings.
NOTE: You must stop and restart the Storage Mirroring service for this change to take effect.