HP Storage Mirroring Software - Manual (Page 130)

10 - 6
Setting transmission stop criteria
Transmission stop criteria stops Storage Mirroring data transmission after a transmission start criteria has initiated the
transmission. If a stop criteria has not been established, the transmission will end when the queue is empty.
1. Select the Stop option in the Limit Type box.
2. Define the stop options to stop Storage Mirroring transmissions by using either or both of the following options:
! Time Limit —Specify the maximum length of time that Storage Mirroring can continue transmitting by indicating a
length of time and choosing minutes, hours, or days.
! Byte Limit —Specify the maximum number of bytes that can be sent before ending the Storage Mirroring
transmission.
3. If no additional transmission options need to be set, establish the connection by clicking Connect .