HP LeftHand P4000 Virtual SAN Appliance Software - Manual (Page 98)

List of diagnostic tests
Table 29 (page 98) shows a sample of the diagnostic tests that are available for the storage system,
including the description of that test and the pass/fail criteria.
For each test, lists the following information:
•
A description of the test
•
Pass / fail criteria
NOTE: Available diagnostic tests depend on the storage system.
For VSA, only the Disk Status Test is available.
Table 29 Example list of hardware diagnostic tests and pass/fail criteria
Fail criteria Pass criteria Description Diagnostic test
Fan is faulty or missing Fan is normal Checks the status of all fans. Fan Test
Supply is faulty or missing Supply is normal Checks the status of all
power supplies. Power Test
Temperature is outside
normal operating range Temperature is within normal
operating range Checks the status of all
temperature sensors. Temperature Test
Cache is corrupt Cache is normal Checks the status of the disk
controller caches. Cache Status
The BBU is charging, testing
or faulty The BBU is normal and not
charging or testing Checks the status of the
battery backed-up cache. Cache BBU Status
One or more drives are
missing All disk drives are present Checks for the presence of
all disk drives. Disk Status Test
The temperature is outside
normal operating range The temperature is within
normal operating range Checks the temperature of
all disk drives. Disk Temperature Test
Warning or Failed if one or
more drives fails health test All drives pass health test S.M.A.R.T. (Self-Monitoring,
Analysis, and Reporting Disk SMART Health Test
Technology) is implemented
in all modern disks.
The report was not
generated The report was successfully
generated Generates a drive health
report. Generate SMART logs (for
analysis contact Customer
Support)
The report was not
generated The report was successfully
generated Generates a drive health
report. Generate DSET Report &
Perc Event Logs (for analysis
contact Customer Support)
The report was not
generated The report was successfully
generated Generates a drive health
report. Generate Platform or HP
Diagnostic Report (for
analysis contact Customer
Support)
The logs were not generated The logs were successfully
generated Generates IBM Support logs
when requested by Customer
Support. Generate IBM Support logs
(for analysis contact IBM
Support)
Generating a hardware information report
Hardware information reports display statistics about the performance of the storage system, its
drives and configuration. Statistics in the hardware reports are point-in-time data, gathered by
clicking the Refresh button on the Hardware Information tab.
1. Select the Hardware Information tab.
98 Monitoring the SAN