Replacing a dedicated boot device – HP LeftHand P4000 Virtual SAN Appliance Software User Manual
Page 31
Table 6 Boot device status (continued)
Description
Boot device status
The device has not yet been used in a storage system. It is
ready to be activated.
Unformatted
The device is not recognized as a boot device.
Not Recognized
The device cannot be used. (For example, the compact
flash card is the wrong size or type.)
Unsupported
NOTE:
When the status of a boot device changes, an event is generated. See
Replacing a dedicated boot device
If a boot hard drive fails, you will see an event that the boot device is faulty. Replace it with a new
drive. The boot device drives support hot swapping and do not require activation.
Checking status of dedicated boot devices
31
This manual is related to the following products: