HP LeftHand P4000 Virtual SAN Appliance Software - Manual (Page 254)

Table 71 TCP/UDP ports used for normal SAN operations with SAN/iQ (continued)
Description Name Port(s) IP Protocol
storage systems. Used for
management and control.
Outgoing from management
applications. Incoming to SAN/iQ Internal 13840, 13850, 13851 TCP
storage systems. Used for
management and control.
Trace Ports for SAN/iQ
Support only. Not required SAN/iQ Support 13846, 13850, 13946,
13847 TCP
for normal day-to-day
operations.
Used for Virtual Manager
communication SAN/iQ Internal 13847 TCP
Used for internal data
distribution and
resynchronization. SAN/iQ Internal 13848 TCP
iSCSI initiators connect to
this port when using the
P4000 DSM for MPIO. iSCSI 13849 TCP
Outgoing from management
applications. Incoming to Console Discovery 27491 UDP
storage systems. Used by
management applications to
discover storage systems.
Used for HTTP requests to
the CIM gateway. Outgoing CIM Server 2003, 5988, 5989 TCP, HTTP/HTTPS
from management
applications. Incoming to
storage systems. Used for
management control. Ports
used for Performance
Dashboard, Global Config
request to Mgmt Gateway.
Ports for CMC notifications
for Alarms Events from Mgmt
Gateway CIM 13990 - 13999 TCP
Used for heart-beating and
distributing configuration SAN/iQ Database 13891, 13893 UDP
changes between
management nodes.
Used for internal control
communication. SAN/iQ Control 13888, 13889 UDP
Used as iSCSI targets where
xx is the number of initiators SAN/iQ Internal 14000 – 140xx UDP
Communication to and from
the Failover Manager, when
applicable. Failover Manager 13887, 13892 TCP
Communication to and from
the Failover Manager, when
applicable. Failover Manager 13947 UDP
Used by the SAN/iQ
Diagnostic tool -DiagiQ that SAN/iQ Diagnostics 4443 TCP
is run by P4000 Support to
get advanced diagnostics
254 SANiQ TCP and UDP Port Usage