HP LeftHand P4000 Virtual SAN Appliance Software - Manual (Page 100)

Table 30 Selected details of the hardware report
means this This term
Hostname of the storage system. Hostname
Full version number for storage system software. Also lists any
patches that have been applied to the storage system. Storage system software
IP address of the storage system. IP address
Support Key is used by a Technical Support representative to log
in to the storage system. Support key
Information about NICs in the storage system, including: NIC data
•
Card number
•
Manufacturer description
• MAC address
•
IP address
• Mask
•
Gateway
• Mode
•
Firmware version
•
Driver name
• Driver version
Information about DNS, if a DNS server is being used, providing
the IP address of the DNS servers. IP address of the DNS servers. DNS data
Information about RAM in the storage system, including values
for total memory and free memory in GB. Memory
Details about the CPU, including model name or manufacturer
of the CPU, clock speed of the CPU, and cache size. CPU
Information about the CPU. CPU seconds shows the number of
CPU seconds spent on user tasks, kernel tasks, and in idle state. Stat
Machine uptime is the total time the storage system has been
running from initial boot up.
Selected information about the backplane LEDs: LED support and
id LED. Backplane information
Includes chassis serial number and BIOS version Motherboard information
For each drive, reports the model, serial number, and capacity. Drive info
For each drive, reports the status, health, and temperature. Drive status
Information about RAID. This includes: RAID
• Rebuild rate
•
Unused devices
• Statistics
•
Unit number
Information about O/S RAID. RAID O/S partitions
Status information about the boot device: status, capacity in MB,
driver version, media used for device, and model. Boot-device statistics
Information about the O/S RAID for the storage system. Statistics
100 Monitoring the SAN