HP LeftHand P4000 Virtual SAN Appliance Software - Manual (Page 42)

Figure 14 Viewing the disk status of a VSA
NOTE: To change the size of the data disk in a VSA, see the HP P4000 VSA Installation and
Configuration Guide for instructions about recreating the disk in the VI Client.
Viewing disk status for the HP LeftHand P4500 and HP P4500 G2
The disks are labeled 1 through 12 in the Disk Setup window, shown in Figure 15 (page 42) ,and
correspond to the disk drives from top to bottom, left to right ( Figure 16 (page 42) ), when you are
looking at the front of the HP LeftHand P4500 and HP P4500 G2.
For the HP LeftHand P4500 and HP P4500 G2, the columns Health and Safe to Remove help you
assess the health of a disk and tell you whether or not you can replace it without losing data.
Figure 15 Viewing the Disk Setup tab in a HP LeftHand P4500 and HP P4500 G2
Figure 16 Diagram of the drive bays in a HP LeftHand P4500 and HP P4500 G2
Viewing disk status for the HP LeftHand P4300 and HP P4300 G2
The disks are labeled 1 through 8 in the Disk Setup window, shown in Figure 17 (page 43) , and
correspond to the disk drives from top to bottom, left to right ( Figure 18 (page 43) ), when you
are looking at the front of the HP LeftHand P4300 and HP P4300 G2.
For the P4300 and the P4300 G2, the columns Health and Safe to Remove help you assess the
health of a disk and tell you whether or not you can replace it without losing data.
42 Configuring RAID and Managing Disks