HP Integrity NonStop H-Series - Manual (Page 60)

SETUPRUN and NSKUNPK Error Messages
IPSetup User’s Guide—524733-007
B-4
SETUPRUN Error Messages
Cause. SETUPRUN tried to write to a volume that the user who ran SETUPRUN does
not have access to.
Recovery. Check that you have write access to the indicated volume, or specify a
different volume and rerun SETUPRUN.
Cause. SETUPRUN tried to access a disk volume that does not exist.
Recovery. The indicated volume is not a valid volume name. Reenter a valid volume
name and then rerun SETUPRUN..
Cause. Incorrect rvu-id or $vol.subvol was specified while running SETUPRUN
using the TAPESIM option.
Recovery. Check that the required tape files (corresponding to specified rvu-id ) are
present at the location $vol.subvol . .
Cause. Incorrect rvu-id is specified while running SETUPRUN using the unpak
option.
Recovery. Check that the required pak files (corresponding to specified rvu-id ) are
present at the location where SETUPRUN resides. .
Cause. TAPESIM server process, $ZRVU, is running.
Recovery. Stop $ZRVU process and restart SETUPRUN.
Cause. rvu-id is not specified in the correct format.
Recovery. Specify rvu-id in the required format (Ann.nn.nn).
Unable to write to volume volume-name
volume-name is not a disk volume.
There are no corresponding tape files (999 code) at the
specified location.
There are no corresponding pak files (1729 code) in the
current subvolume.
TAPESIM server process, $ZRVU, already exists. Please stop
$ZRVU and restart SETUPRUN.
Incorrect RVU ID specified, RVU ID should be of the type
Ann.nn.nn.
Example: H06.06.01