HP Integrity NonStop H-Series - Manual (Page 24)

Automated Software Placement Using the IPSetup
Windows Application
IPSetup User’s Guide—524733-007
1-10
Task 2: Provide Needed Placement Information
c. For secure mode of communication select SSH, else accept the default Telnet,
which sends data in unsecure mode.
Depending on your selection, relevant fields are enabled/disabled.
1. If you selected SSH, change the SSH port as necessary. The port can be
from 0 through 65535.
The default SSH port is 22.
2. If you selected Telnet, change the Telnet and FTP ports as necessary. The
port can be from 0 through 65535.
The default Telnet port is 23 and the default port for FTP is 21.
3. For Telnet mode, enter the logon service that will call the Safeguard
prompt.
The default is TACL.
d. Click Next >.