HP Integrity NonStop H-Series - Manual (Page 45)

Manual Software Placement Using FTP and
SETUPRUN
IPSetup User’s Guide—524733-007
2-11
Example: Using FTP to Transfer Files
8. Change the FTP transfer to binary mode:
ftp> bin
200 Type set to I.
9. Copy the filemgr file to the host system:
ftp> put filemgr
200 PORT command successful.
150 Opening data connection for FILEMGR
(130.252.147.121,4243d).
226 Binary Transfer complete.
92160 bytes sent in 0.43 seconds (213.83 Kbytes/sec)
10. Copy the nskunpk file to the host system:
ftp> put nskunpk
200 PORT command successful.
150 Opening data connection for NSKUNPK
(130.252.147.121,4244d).
226 Binary Transfer complete.
1417698 bytes sent in 5.13 seconds (276.52 Kbytes/sec)
11. Set the interactive mode off:
ftp> prompt off
Interactive mode Off.
12. Change your local directory to where the product files you want to transfer are
located:
ftp> lcd E:\nsk_sw\se30v1\risc
Local directory now E:\nsk_sw\se30v1\RISC
13. Copy all the files to the host system. This script is a command to copy all files that
begin with y:
ftp> mput y*
200 PORT command successful.
150 Opening data connection for Y0402000
(130.252.147.121,4247d).
226 Binary Transfer complete.
1431844 bytes sent in 5.21 seconds (274.93 Kbytes/sec)