Agilent Technologies HDMP-3001 - Manual (Page 94)

94
ADDR = 0x1CD: LAPS Mode
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Bit name Reserved Reserved RX_ADR_ RX_CNT_ RX_SAPI_ RX_ADR_ RX_CNT_ RX_SAPI_
REM_INH REM_INH REM_INH CHECK_ CHECK_ CHECK_
INH INH INH
R/W — — R/W R/W R/W R/W R/W R/W
Value 0 0 0 0 0 0 0 0
after
reset
Bits 7-6: Reserved
Bit 5: RX_ADR_REM_INH is set to inhibit the removal of the received Address field. When set, the
Address field is prepended to the MAC Payload. When cleared, the Address field is not forwarded
through the MII interface.
Bit 4: RX_CNT_REM_INH is set to inhibit the removal of the received Control field. When set, the
Control field is prepended to the MAC Payload. When cleared, the Control field is not forwarded
through the MII interface.
Bit 3: RX_SAPI_REM_INH is set to inhibit the removal of the received SAPI field. When set, the SAPI
field is prepended to the MAC Payload. When cleared, the SAPI field is not forwarded through the
MII interface.
Bit 2: RX_ADR_CHECK_INH is set to inhibit the checking of the received Address field.
Bit 1: RX_CNT_CHECK_INH is set to inhibit the checking of the received Control field.
Bit 0: RX_SAPI_CHECK_INH is set to inhibit the checking of the received SAPI field.